Materials

FILTER: [X] FDM

MAT_ID	NAME	STRENGTH	HEAT_DEF	COST	STATUS
M-01	PLA_BASIC	LOW	55C	$	ACTIVE
M-02	PETG_TOUGH	MED	75C	$$	ACTIVE
M-03	ABS_IND	HIGH	95C	$$	ACTIVE
M-04	ASA	HIGH	90C	$$	ACTIVE
M-05	TPU_FLEX	MED	60C	$$$	ACTIVE
M-06	NYLON	HIGH	80C	$$$	ACTIVE
M-07	NYLON-CF	V.HIGH	85C	$$$$	ACTIVE

MATERIAL: PLA_BASIC

GOOD FOR: Visual prototypes, fast iteration, detailed parts

NOTES: Easy printing, low warping, lower heat resistance

MATERIAL: PETG_TOUGH

GOOD FOR: Functional parts, chemical and water resistance

NOTES: Durable, good layer adhesion, more stringing than PLA

MATERIAL: ABS_IND

GOOD FOR: Durable functional parts and higher heat use

NOTES: Higher heat resistance, can warp, needs good ventilation

MATERIAL: ASA

GOOD FOR: Outdoor parts needing UV resistance

NOTES: Better UV resistance and less warping than ABS

MATERIAL: TPU_FLEX

GOOD FOR: Flexible parts, grips, cases, vibration damping

NOTES: Elastic, abrasion resistant, slower print speeds

MATERIAL: NYLON

GOOD FOR: Wear parts, moving parts, high toughness

NOTES: Strong, low friction, hygroscopic (must be dry)

MATERIAL: NYLON-CF

GOOD FOR: Stiff, lightweight functional parts

NOTES: Stiffer and more brittle; abrasive, needs hardened nozzle